Sine wave filter, Rated Current 10A 4kw ,New design

Sine wave filter, Rated Current 10A 4kw ,New design

Sine wave filter Description :

SWF Series Sine Wave Filters convert the PWM output signal of motor drives into a smooth sine wave with low residual;
Reduce the resonance phenomenon caused by distributed capacitance and inductance of the long cable(longer than 50 meters);
Eliminate the excessive motor voltage caused by high dv/dt,
Reduce noise of motor by filter application;
Prolong motor life;
Protecting the motor insulation;
Increase transmission distance;
With the application of this filter, normal motor can replace variable frequency motor.

Sine wave filterApplications:

Ventilators,conveyors,Pumps
HVAC installations, Compressors
Elevators ,Cranes , wind power,UPS,EPS
Motor drive with long cable
Motor drive with multiple motors in parallel
Medium voltage applications(deployed in front of the step-up transformer)

Sine wave filterTechnical Data:

Nominal voltage range : 3*380 to 500VAC±10%
Motor frequency: 0-120Hz;
Switching frequency :≧ 4kHz;
Residual Ripple Voltage:THDv<5%
Voltage drop at rated current:≦10%(50HZ);
Motor Cable Length:Up to 2000m;
Work Model:Continuous for indoor operation
Norminal Motor drive input power rating:3.7kw to 630kw;
Efficiency:98 to 99%@norminal line voltage and power
Overload capability:150% 60S,120% 60min
Test Voltage:2240VDC,2s(line/line) 2720VDC,2s(lines/case)
Dielectric strength:AC4000V/5mA/60s
Insulation resistance:core-winding,≧100MΩ(DC1000V);
Climatic Category(IEC60068-1):25/100/21
Protection:IP30(IP40/IP54 upon request),indoor:IP20
Cooling:Internal forced air
Load type:typical motor load;standard step-up transformer;other linear load;

Sine wave filter Technical Standards

Capacitors:CEI EN 60831-1/2,IEC 831-1/2
Equipment:CEI EN60439-1,IEC 439-1,IEC 60939

Sine wave filter Characteristic:

Sikes Sine wave filters for various servo motor of VSD systems(esp for inverters or switching power suppliers),are designed to change the PWM output voltage of the inverter and generate an almost sinusoidal voltage . The passive series is intended for use in 380v-480v network.
Sikes offers you another economic choice except Schaffner and MTE filter .

Filter
Nominal Current Range (A) 10
Nominal Voltage range (V) 400
Phase 3 Phase
Power range (KW) 4
Switching Frequency ≥6KHz

Write a review

Please login or register to review

This is a Demo Shop. You can place your order, but please contact us before you pay.

  • Views: 30642
  • Brand: SIKES
  • Product Code: SKS-SF-0010-4A/05
  • Availability: In Stock

Tags: Sine wave filter, Sinus Filter