Active Power Filter, Active Harmonic Filter 50A ，Wall mount
Definition of Harmonic
Due to the existence of the nonlinear load, the current and voltage waveforms in the power grid will be distorted to non-sinusoidal wave. Through the decomposition of the non-sinusoidal wave by Fourier series, the component whose frequency is the same as the power frequency is called fundamental wave. The component whose frequency is greater than the power frequency is called harmonics.
Fundamental Principle of APF
The active power filter (APF) is connected with the power grid in parallel, adopting the PWM conversion technology to produce the current equal but opposite to the harmonics by conducting the real-time detetion of the laden harmonics and reactive component, which will be distilled into the power supply and distribution system, thus realizing the function of restraining the harmonics and reactive dynanmic compensation.
1. Real-time Tracking and Dynamic Compensation
It adopts the inspection technology based on the instantaneous reactive power theory, conducts the real-time detection of the harmonic current, and automatically tracks the change in the harmonics of the power grid by tracking and controlling the instantaneous current. It feartures high controllability and fast responsivness.
2. Excellent Filtering Characteristic
The filtering performance is free from the impact of system impedance and the risk of resonance.
3. Flexible Compensation Mode
One machine serves several purposes, i.e. it can not only filter the harmonic current, but also compensate the reactive power, thus improving the power factor.
4. DSP Intelligent Monitoring
The high-speed DSP inspection and calculation can ensure accurate and effective inspection and compensation control of the harmonic, having the functions of intelligent monitoring and automatic fault diagnosis at the same time; it has the remote communication interface and can conduct the real-time monitoring via the PC.
5. Advanced Power Conversion Design
It adopts the latest IGBT high frequency switching elements, and the main circuit adopts the three-phase, bridge-type, full-controlled PWM current conversion technology, with such characteristics as small size, high efficiency and high reliability. The advanced multiplex technology realizes the expansion of the machine’s capacity.
6. Standard Modular Design
The power circuit and control circuit adopt the module or component structures, which enhance the reliability and maintainability during the use while realizing the standardized production.
Features of Active Harmonic Filter:
1, The compact modular combination fits well for data centers and other computer rooms where space is limited;
2, The modular model adopts the same design concept as the industrial one, and its environmental adaptability is even higher;
3, The total response time of Sikes APF is less than 2 milliseconds, and the harmonics can be accurately compensated to avoid over-compensation or under-compensation;
4, It can instantaneously compensate the 2 ~ 50th harmonics, which is a wide range;
5, The compensation target can be adjusted, so as to meet the harmonic mitigation requirement in a most cost-effective way.
6, With rich functional options, the protection level of industrial models can be up to IP43.
7, The industrial model adopts a tower structure with high environmental adaptability, which is suitable for harsh operating conditions;
8, The industrial model is equipped with independent air duct and veneer warehouse to ensure the stable operation of the machine.
|Mounting Mode||Wall mount|
|Power grid Frequency||50 Hz（±10%）|
|Power grid voltage||380V（-40%～+20%）|
|Type of optics||Active|
Certificates : http://sikes-elec.com/Certificates.html
This is a Demo Shop. You can place your order, but please contact us before you pay.